DEVELOPMENT OF AN E-RICKSHAW FOR USE IN NIGERIA

Authors

  • Ken Ebikebina Zik Department of Mechanical Engineering, Federal University of Petroleum Resources, Effurun
  • Chinedum Ogonna Mgbemena Department of Mechanical Engineering, Federal University of Petroleum Resources, Effurun

Abstract

An electric rickshaw (e-rickshaw) was designed and fabricated at the Federal University of Petroleum Resources Effurun, Delta State Nigeria. The E-rickshaw can be charged using the existing national electric grid and solar energy. The 58 AH lithium battery used in the E-rickshaw can be fully charged within 8 hours. It has a brushless DC motor and a motor controller of 2500W/48V. The axle of the E- rickshaw was locally fabricated in the Mechanical Engineering Workshop, Federal University of Petroleum Resources, Effurun, Delta State, Nigeria. Solidworks software was used for the computer-aided design and MATLAB-Simulink was used for the powertrain and FTP75 drive cycles of the electric rickshaw. This development is a sustainable step toward mitigating environmental pollution from fossil fuels and promoting clean energy.

Downloads

Published

2022-11-07

How to Cite

Zik, K. E., & Mgbemena, C. O. (2022). DEVELOPMENT OF AN E-RICKSHAW FOR USE IN NIGERIA. INTERNATIONAL JOURNAL OF INDUSTRIAL AND PRODUCTION ENGINEERING, 1(2), 14–28. Retrieved from https://journals.unizik.edu.ng/ijipe/article/view/872

Issue

Vol. 1 No. 2 (2022): JULY 2022 ISSUE

Section

Articles